DESCRIPTION AISIN greenTECH+ Fully Synthetic 0W-20 SP ILSAC GF-6A is formulated from VHVI base oils, high performance additive systems and leading-edge viscosity index improver, which meet the requirement of current advanced toptier engine oil grade of API SP and ILSAC GF-6A. It is optimized to provide complete engine oil performance, especially fuel efficiency, through friction reduction and enhanced durability. Aisin greenTECH+ 0W-20 optimized to provide complete engine oil performance for cold temperature performance, reducing friction loss and durability. TYPICAL APPLICATIONS • All passenger vehicles and light truck (four-cycle) gasoline (and diesel) engines with both naturally aspirated and T-GDI, GDI engines in passenger cars including SUV. It is also suitable for Hybrid and Eco-car applications. Most importantly, Gas-fueled (natural gas and LPG) spark ignition engines where conventional passenger car motor oils are recommended. • Gas-fueled (natural gas and LPG) spark ignition engines where conventional passenger car motor oils are recommended. This bulletin was prepared in good faith from the best information available at the time of issue. While the values and characteristics are considered representative, some variation, not affecting performance, can be expected. It is the responsibility of the user to ensure that the products are used in the applications for which they are intended. Aisin, the Aisin logo, and related marks are trademarks of Aisin Asia Pte Ltd, used under license. Copyright © 3Q23 UPDATE_SEPTEMBER AISIN ASIA Pte Ltd. All Rights Reserved • Four-stroke gasoline engines in motorcycles and portable power equipment where the manufacturer recommends conventional passenger car motor oils. PERFORMANCE STANDARDS • API SP / ILSAC GF-6A / Resource Conservation (0W-20) CUSTOMER BENEFITS • For Gasoline (and Diesel) engine application equipped with T-GDI, GDI, DOHC, EFI and VVT features. • Prevention & Protection of LSPI (Low Speed Pre-Ignition) phenomena for T-GDI engines. Minimizes abrupt damage of key engine components (such as piston rings, connecting rods and so on) by prevention of LSPI (Low Speed Pre-Ignition) phenomena in T-GDI engines. • Superior Cold Performance Superior low temperature properties with proven metal-organic anti-wear additives provide easy start-up of engine at extremely low temperature and excellent wear control in even the most sophisticated valve train mechanisms, including those with variable valve timing. • Fuel Efficiency specifically tailored viscosity characteristics and effective friction modifier minimize internal engine frictional losses, with which oil fuel consumption shall be reduced. • Saves on maintenance costs High thermal stability and excellent oxidation resistance provides outstanding protection against in-service oil degradation that contributes to filter blocking and sludge formation in the oil galleries, crankcase, and valve train. KEY PROPERTIES SAE Viscosity Kinematic Viscosity, mm2/s Density (g/cm3@ 15°C) @ 40°C @ 100°C Viscosity Index Pour Point (°C) Flash Point (°C) 0W-20 0.85 45.0 8.40 167 -43 226 This bulletin was prepared in good faith from the best information available at the time of issue. While the values and characteristics are considered representative, some variation, not affecting performance, can be expected. It is the responsibility of the user to ensure that the products are used in the applications for which they are intended. Aisin, the Aisin logo, and related marks are trademarks of Aisin Asia Pte Ltd, used under license. Copyright © 3Q23 UPDATE_SEPTEMBER AISIN ASIA Pte Ltd. All Rights Reserved